Industries We Serve
American Pipe Bending is dedicated to serving your pipe and tube bending needs, from the refinery floor to the roadside.
One capability, very different customers
The same 42 inch capability that bends a refinery transfer line also bends a highway sign gantry. That is not a coincidence. Both need a large-diameter section bent to a controlled radius without thinning the wall, and not many places can do it.
What changes between sectors is everything around the bend. A power plant wants ASME Section I paperwork. A pharmaceutical plant wants material traceability and a surface finish. A conveying line wants the longest radius that will fit, because the bend is where the wall wears through. A food plant wants no internal marks at all.
So the bend is the easy part. The hard part is knowing what each industry is actually going to check when the part arrives.
Below is the list of sectors American Pipe Bending works with. It is the company’s own list, not a market we have decided to claim. Each one has its own page setting out what that industry buys here.
From the refinery to the roadside
We work with companies across heavy industry, manufacturing and infrastructure, including but not limited to the sectors below.
Process, Energy and Chemical
Manufacturing and Processing
Transportation, Marine and Structural
Three questions every industry asks, in a different order
Can you make it at all
This is a geometry question and it has a definite answer. Diameter, wall and centerline radius decide between them whether a section will move without damage. Above 42 inch outside diameter or 4 inch wall the answer here is no. Below that, send the three numbers and you will get a yes or a no rather than a maybe.
Can you prove it
This is a code question, and it is the one that separates sectors. Pressure work wants the ASME stamps. Pipeline work wants B16.49 wall thinning and ovality numbers. Pharmaceutical work wants heat numbers tied to the finished part. Sanitary work wants a surface finish. The stamps and the testing here cover most of it; the rest is settled in writing at quote stage.
Can you make the date
This is a scheduling question, and it is usually the one that decides the order. Turnarounds, outages and mill shutdowns do not move. Keeping cutting, bending, stress relieving and non-destructive testing on one floor removes the handoffs where schedules normally slip, which is the practical reason this shop runs all of them rather than subcontracting.
One shop floor, four very different jobs
From heavy-wall refinery piping to interstate sign structures, the same capability serves very different industries.
Refining and Petrochemical
Heavy-wall process piping, bent under computer control
Power Generation and Boiler
Induction bends for boiler piping and power plant runs
Transportation Infrastructure
Overhead sign structures for state highway work
Heat Transfer
Finned tube panels off the shop floorWhatever the code calls for
Have a drawing? Send it over.
Send a drawing or a sketch and our team will get back to you with a quote.